Showing all posts tagged #productiondesign:


Production Design - not a fan.

Posted on September 8th, 2013


Kensington is doing a 4-week series based off the book Not a Fan. The Communications Department has gone with the same branding as the book. Simple white text on black.

We decided to play off the same design by creating a 32' wide black rectangle with cut-out letters. We're using the same typeface as the program and lobby graphics. The fun thing I'm doing with it is having the letters glow with saturation - and motion texture as we're using projectors to light the letters. Add some lights and we have a design. Simple is good, usually. It'll be great for the walk-in and even during communication moments. I'm concerned about the sensitivity of a closing song. The other departments think it'll be fine. Perhaps I'm just a bit cautious of sabotaging such a moment. We'll see I guess.

Ingredients:

*Oh, and you should ask me about the idea we almost went with. It might have been a bit cliché, but I know our teachers would have loved it. A bit too much to try and do with our timeline (I was scheduled for vacation and we're in the middle of Christmas prep) so I've back-pocketed yet another design. I think it would've been pretty amazing...

Translucent Coroplast Cubes

Posted on August 10th, 2013

So I wanted to share a blog about our new design. I was alone in the auditorium, and on a whim I decided to point my phone at myself and take you on a video tour of this weekend's design.

Please excuse my stutter and the not-broadcast-legal colors. Hopefully my off-the-cuff content makes sense and the camera shots are somewhat helpful. Ask me questions about anything I wasn't clear on.


Please also give me feedback:
  • Should I do this again?
  • I know I should definitely light it differently - if I had known that I would have the thought of shooting video, I would've adjusted the lighting…
  • I'll also want to use the good camera on the back of the phone instead of the front facing camera. Biggest benefit is that I'll actually know what the shot composition is when I'm doing my walk and talk...
  • Do I change the format? This was obviously an unscripted single take with no edits. I suppose I could put some forethought into it (as I am a veteran video producer) perhaps shooting a standup, then voicing over an edited tour of properly composed shots…
  • I didn't share any typed details about the design in this post. Should I?

Visqueen Truss Wraps

Posted on July 25th, 2013

I've been asked this question a few times over the past few months so I thought I'd turn my reply into a blog post.

Hey Eric, I'm looking to buy some soft good or vinyl wraps for 12" box trussing. I wanted to check with you to see if you have a company you would go with for something like this. Let me know if you do, I'd like to order them as soon as possible. If you don't know of anything, no big deal, I'll go with a company I found online.

I'm honestly a fan of Visqueen. Cut into 3' wide strips, wrap around 3 sides that the audience can see - adhering with Gaff tape. A light from inside will glow the Visqueen and highlight the truss for a really great looking texture.

Another thought to consider is pulling fabric through the inside of truss. Again, position your truss warmer inside the truss as well - the fabric will take color and play with the folds for beautiful saturation while the truss will be highlighted in silhouette to for additional texture and form.

Below are photos showing both ideas in use.



Gels and Gobos

Posted on July 20th, 2013

Don't ever settle for white functionals when hue and texture can enhance the storytelling. That said, often No Color is the correct choice. My point is, take some time to read the script, talk with your director, emotionally connect with each scene, and generally put thought to your craft.

This weekend, we helped create a scene taking place after school hours in an old elementary classroom. The first photo shows the gels and gobos. Next is a snapshot (I wish I had used my good camera as my phone hardly comes close to what the eye or video camera, for that matter saw) of the scene being rehearsed. Finally (for context) a shot of the whole stage during the teaching.

First day of shooting for Project:Shine

Posted on July 16th, 2013

Here's a cryptic behind the scenes shot from my DP position behind the camera. It was a fun day spent quickly creating #productiondesign scenes on the fly with only a minimal bag of tricks to pull from; rocking some copy editing for the #teleprompter; shooting with #DSLR; meeting some new friends; and working with an old friend who's quite a good producer. Not shown are shots of and from within a vehicle I don't usually ride in.

A Response to Questions About Design Materials and Our Stage Turn Process

Posted on May 1st, 2013

I often get asked questions about my thoughts on design materials and/or our production process. These are my responses to an email that I sent out yesterday:

What do you think of the trend to have a big video or LED wall as the main set feature?

I think big screens are fine so long as 1, you have the budget; 2, you have the stage space, 3, and most importantly if you produce content worthy of the space. I personally think they’re cliché and typically only put a screen in the set for events where we have a click-tracked music video that goes along with a live song. Regarding LED walls, the time has come when they’re legitimately worth considering: If you’re living in sets for a length of time, if you have a shallow stage, if you don’t already have a good projector, etc.

Do you still create a new set every week?

We still do at least two sets every week - changing our stage to uniquely support every event. I’m not sure it’s the way for everyone, but it continues to work for our context. If nothing else, it lets me exercise my own mind ;) However, doing a turn after every service is what maintains our volunteer team. Our typical turn lasts 75-90min to change from one stage to the next. A big reason why we can succeed at this is that it has become our regular workflow. Our volunteers don’t know that it’s not normal, so they just do… #process

What are you currently using the most for sets- fabric/lighting? set pieces?

We have a "tinker toy set" of go-to materials that I use to design from. Truss, fabrics, hard-goods, lights, etc. In addition to our inventory, I’m always on the lookout for materials that could catch light well. I file away photos and ideas in Evernote (and too often honestly, just the back of my mind #GTDfail) to recal later when I hear the idea that a material could be perfect for feel.

For the past few years, I’ve been creating stages form the "box" I determine for myself at the beginning of each series: I choose 2-4 materials that I will use as through-lines for each series. Then I use these in a different way to support the art and tell the story specific to each day.

Example is that for our current Midweek series (5 weeks talking about women from Scripture) I’m using a silver sheer fabric and our moving head profiles. We just finished a Weekend series titled "Walking Dead" where I wanted to riff on a post-apocalyptic, industrial vibe. I found about a dozen unused 4’x10’ cage pieces (used for storage in our basement) and set these up on stage with some rusty (or painted to look so) 55gal drums and some pallets - throw some gobo breakups at these, and you have a look. Then just change up the placement and it feels new each week.

The soft goods are an example of something we have in our inventory. I purchased a roll of this fabric for an event this past fall; now we can use it whenever we want. The cage pieces are an example of something I’ve been waiting to use for years, honestly. I just needed the right series, where they’d make for the perfect visual.

We are thinking about limiting our design to 4 really good sets and tweaking them on a per series basis, at least until we get into our new campus late next year. What do you think of that plan?

A majority of my church clients seem to like the idea of 3-5 really good sets over the course of a year - per season, rather than per series and perhaps with something special for Christmas and Easter. I think this strategy can be a good one. The main thing to consider is how they can be adapted to any special events that might need the space. Is it possible to close the main traveler? If living in an industrial, production based design, is it possible to create a look that can be tender and beautiful? There are ways to think through this and plan for such occasions. My main caution when living in a set for such a length of time is the potential "rats nest" of cable that can build up. Also, when a team is not regularly doing stage turns, it tends to take a much longer time; therefore plan on a day or two instead of a couple hours.

Also, make sure to consider your lighting inventory/plot. Poor lighting will negate even the best set; for that matter, good lighting will make an ok set look fantastic.

Our take on Palm Sunday

Posted on March 24th, 2013

Our take on Palm Sunday (which has to hide the Easter set behind the traveler) The simple beauty of a broken down band and a bare stage dressed w. but a simple length of red fabric on the floor






#productiondesign and #photography by EGWolfe, fabric by @RoseBrand

Posted on March 17th, 2013

#productiondesign and #photography by EGWolfe, fabric by @RoseBrand

I grabbed this screenshot from an email blast sent out by @RoseBrand last month. I’m honored to let them use my my photos. These are a four examples of how I’ve found uses for white PolyStretch that we purchased about 8 years ago. Here’s looking forward to their next mailer and some of the other fabrics of theirs I use. In the meantime, you can see some of their other fabrics in my portfolio, have a look: egwolfe.info

*note to myself: time to upload some recent designs


Journey Home Experience

Posted on March 10th, 2013

My typical context for #productiondesign is a 50' wide stage. This post is a chance to share a little about what has become a very enjoyable way to apply my skills: Helping to create another environmental, walk-through experience.
This past week at Kensington (in conjunction with our 6 week weekend series and their small group curriculum) people have been going through the Journey Home Walk-thru Experience.
My friend Kristen produced the project, and I was privileged to partner with her in creating a story-telling experience for people in these 3rd floor classrooms. I love ideating with such minds as hers to come up with ways to maximize our minimal resources. How could we use what we had and harness amazing volunteers to pull off the magical in a very short timeline? Huge thanks to such new friends Ed (who pointed the construction) and his wife, Michele, who applied her artistry with staple-gun and brush. Thanks also to such friends as Kyle, Mark, Andrew, Collin, and the unnamed others who helped transform some stark rooms into something magical. Thanks again, Kristen!
Ingredients:
  • Lumber - some new (especially for the foundational construction) but lots harvested - old pallets and also some genuine barn wood (thanks to the beautiful openhandedness of my friend Josh)
  • Related to the lumber that we used for both construction and decor, Corrugated Metal.
  • Also related was a bunch of branches. Some turned into curtain rods; others bunched for decor in corners.
  • Fabrics - We placed an order from RoseBrand for Muslin (IFR) to make the Tepees and the window treatments. We also reused such fabrics as Black Tergalet, Burgundy Commando (both recycled from last year's Easter as well as the Story conference - http://egwolfe.tumblr.com/post/32260613465/story2012-productiondesign-our-goal-was-to) and as usual, some Duvetyn (I find endless uses for this amazing bang-for-the-buck product). Yes, I'm a fan of RoseBrand… Also some camouflage netting that we used for Easter '08.
  • Recycled Props like lamps from Christmas, fake stone pillar reflecting pools from a Midweek series ages back, several benches and chairs, etc.
  • Pillows, drapes, sand for a sandbox, and custom created signage.
  • In addition to lamp-posts, candles, suspended light bulbs, lamps, and chandeliers; I created a light-plot using a few theatrical instruments including pars & lekos with gels&gobos, RGB-LED fixtures, as well as some home-made track-lighting pin-spots that we recycled from a previous experiential walk-through on the 2nd floor. The benefit was that we eased guests into the experience and therefore could get away with things being pretty dim. For what we had available to use, I was very happy with how it turned out.

It was originally scheduled to run last week, but has been extended through at least tomorrow. If you have a chance, you should come experience it in person.














Production Design Software

Posted on March 10th, 2013

I'm often asked what software I use, and am probably long overdue at sharing this post. I'm answering this question from the perspective of my primary job - Production Designer at Kensington Church. *See below for more context if you're interested.

I'm a fan of OmniGraffle (Mac or Microsoft Visio if on PC) It's great as a basic 2D CAD with layers and everything; and its drag and drop simplicity of putting icons for people and set pieces into place is pretty fantastic.

The price point is also great, especially for multiple users.

Vectorworks is awesome, but is more (both in cost and complexity) than our workflow requires - especially with multiple users; most of whom are not "designing" but rather just laying out a plot.

There are many other programs I might consider writing about, but I'll leave this post with the above two mentions for now. Connect with me and I can share my workflow if you're interested…


*I design for our main broadcast location. We have 4 other campuses each with a TD who is responsible for figuring out how to take the central designed service and make it work on their stage, with their team and resources, and with whatever might uniquely happen at their campus that weekend. We move fast. At our location, we have at least 2 completely different stage designs every week…see: http://egwolfe.tumblr.com/post/6144545367/we-change-our-stage-with-a-completely-unique

Eric G Wolfe

Creative Director | Process Architect. Design Strategist. Leadership Coach.